1 # Doxyfile 1.5.3-20071008
3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
6 # All text after a hash (#) is considered a comment and will be ignored
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
17 # This tag specifies the encoding used for all characters in the config file that
18 # follow. The default is UTF-8 which is also the encoding used for all text before
19 # the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into
20 # libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of
23 DOXYFILE_ENCODING = UTF-8
25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26 # by quotes) that should identify the project.
28 PROJECT_NAME = @PACKAGE@
30 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
31 # This could be handy for archiving the generated documentation or
32 # if some version control system is used.
34 PROJECT_NUMBER = @VERSION@
36 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37 # base path where the generated documentation will be put.
38 # If a relative path is entered, it will be relative to the location
39 # where doxygen was started. If left blank the current directory will be used.
41 OUTPUT_DIRECTORY = dox
43 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44 # 4096 sub-directories (in 2 levels) under the output directory of each output
45 # format and will distribute the generated files over these directories.
46 # Enabling this option can be useful when feeding doxygen a huge amount of
47 # source files, where putting all generated files in the same directory would
48 # otherwise cause performance problems for the file system.
52 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
53 # documentation generated by doxygen is written. Doxygen will use this
54 # information to generate all constant output in the proper language.
55 # The default language is English, other supported languages are:
56 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57 # Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
58 # Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
59 # Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
60 # Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
62 OUTPUT_LANGUAGE = English
64 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
65 # include brief member descriptions after the members that are listed in
66 # the file and class documentation (similar to JavaDoc).
67 # Set to NO to disable this.
69 BRIEF_MEMBER_DESC = YES
71 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
72 # the brief description of a member or function before the detailed description.
73 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
74 # brief descriptions will be completely suppressed.
78 # This tag implements a quasi-intelligent brief description abbreviator
79 # that is used to form the text in various listings. Each string
80 # in this list, if found as the leading text of the brief description, will be
81 # stripped from the text and the result after processing the whole list, is
82 # used as the annotated text. Otherwise, the brief description is used as-is.
83 # If left blank, the following values are used ("$name" is automatically
84 # replaced with the name of the entity): "The $name class" "The $name widget"
85 # "The $name file" "is" "provides" "specifies" "contains"
86 # "represents" "a" "an" "the"
90 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
91 # Doxygen will generate a detailed section even if there is only a brief
94 ALWAYS_DETAILED_SEC = NO
96 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
97 # inherited members of a class in the documentation of that class as if those
98 # members were ordinary class members. Constructors, destructors and assignment
99 # operators of the base classes will not be shown.
101 INLINE_INHERITED_MEMB = NO
103 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
104 # path before files name in the file list and in the header files. If set
105 # to NO the shortest path that makes the file name unique will be used.
109 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
110 # can be used to strip a user-defined part of the path. Stripping is
111 # only done if one of the specified strings matches the left-hand part of
112 # the path. The tag can be used to show relative paths in the file list.
113 # If left blank the directory from which doxygen is run is used as the
118 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
119 # the path mentioned in the documentation of a class, which tells
120 # the reader which header file to include in order to use a class.
121 # If left blank only the name of the header file containing the class
122 # definition is used. Otherwise one should specify the include paths that
123 # are normally passed to the compiler using the -I flag.
125 STRIP_FROM_INC_PATH =
127 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
128 # (but less readable) file names. This can be useful is your file systems
129 # doesn't support long names like on DOS, Mac, or CD-ROM.
133 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
134 # will interpret the first line (until the first dot) of a JavaDoc-style
135 # comment as the brief description. If set to NO, the JavaDoc
136 # comments will behave just like regular Qt-style comments
137 # (thus requiring an explicit @brief command for a brief description.)
139 JAVADOC_AUTOBRIEF = NO
141 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
142 # interpret the first line (until the first dot) of a Qt-style
143 # comment as the brief description. If set to NO, the comments
144 # will behave just like regular Qt-style comments (thus requiring
145 # an explicit \brief command for a brief description.)
149 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
150 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
151 # comments) as a brief description. This used to be the default behaviour.
152 # The new default is to treat a multi-line C++ comment block as a detailed
153 # description. Set this tag to YES if you prefer the old behaviour instead.
155 MULTILINE_CPP_IS_BRIEF = NO
157 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
158 # member inherits the documentation from any documented member that it
163 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
164 # a new page for each member. If set to NO, the documentation of a member will
165 # be part of the file/class/namespace that contains it.
167 SEPARATE_MEMBER_PAGES = NO
169 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
170 # Doxygen uses this value to replace tabs by spaces in code fragments.
174 # This tag can be used to specify a number of aliases that acts
175 # as commands in the documentation. An alias has the form "name=value".
176 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
177 # put the command \sideeffect (or @sideeffect) in the documentation, which
178 # will result in a user-defined paragraph with heading "Side Effects:".
179 # You can put \n's in the value part of an alias to insert newlines.
183 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
184 # sources only. Doxygen will then generate output that is more tailored for C.
185 # For instance, some of the names that are used will be different. The list
186 # of all members will be omitted, etc.
188 OPTIMIZE_OUTPUT_FOR_C = NO
190 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
191 # sources only. Doxygen will then generate output that is more tailored for Java.
192 # For instance, namespaces will be presented as packages, qualified scopes
193 # will look different, etc.
195 OPTIMIZE_OUTPUT_JAVA = NO
197 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
198 # include (a tag file for) the STL sources as input, then you should
199 # set this tag to YES in order to let doxygen match functions declarations and
200 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
201 # func(std::string) {}). This also make the inheritance and collaboration
202 # diagrams that involve STL classes more complete and accurate.
204 BUILTIN_STL_SUPPORT = NO
206 # If you use Microsoft's C++/CLI language, you should set this option to YES to
207 # enable parsing support.
211 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
212 # Doxygen will parse them like normal C++ but will assume all classes use public
213 # instead of private inheritance when no explicit protection keyword is present.
217 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
218 # tag is set to YES, then doxygen will reuse the documentation of the first
219 # member in the group (if any) for the other members of the group. By default
220 # all members of a group must be documented explicitly.
222 DISTRIBUTE_GROUP_DOC = NO
224 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
225 # the same type (for instance a group of public functions) to be put as a
226 # subgroup of that type (e.g. under the Public Functions section). Set it to
227 # NO to prevent subgrouping. Alternatively, this can be done per class using
228 # the \nosubgrouping command.
232 #---------------------------------------------------------------------------
233 # Build related configuration options
234 #---------------------------------------------------------------------------
236 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
237 # documentation are documented, even if no documentation was available.
238 # Private class members and static file members will be hidden unless
239 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
243 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
244 # will be included in the documentation.
246 EXTRACT_PRIVATE = YES
248 # If the EXTRACT_STATIC tag is set to YES all static members of a file
249 # will be included in the documentation.
253 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
254 # defined locally in source files will be included in the documentation.
255 # If set to NO only classes defined in header files are included.
257 EXTRACT_LOCAL_CLASSES = YES
259 # This flag is only useful for Objective-C code. When set to YES local
260 # methods, which are defined in the implementation section but not in
261 # the interface are included in the documentation.
262 # If set to NO (the default) only methods in the interface are included.
264 EXTRACT_LOCAL_METHODS = YES
266 # If this flag is set to YES, the members of anonymous namespaces will be extracted
267 # and appear in the documentation as a namespace called 'anonymous_namespace{file}',
268 # where file will be replaced with the base name of the file that contains the anonymous
269 # namespace. By default anonymous namespace are hidden.
271 EXTRACT_ANON_NSPACES = NO
273 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
274 # undocumented members of documented classes, files or namespaces.
275 # If set to NO (the default) these members will be included in the
276 # various overviews, but no documentation section is generated.
277 # This option has no effect if EXTRACT_ALL is enabled.
279 HIDE_UNDOC_MEMBERS = NO
281 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
282 # undocumented classes that are normally visible in the class hierarchy.
283 # If set to NO (the default) these classes will be included in the various
284 # overviews. This option has no effect if EXTRACT_ALL is enabled.
286 HIDE_UNDOC_CLASSES = NO
288 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
289 # friend (class|struct|union) declarations.
290 # If set to NO (the default) these declarations will be included in the
293 HIDE_FRIEND_COMPOUNDS = NO
295 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
296 # documentation blocks found inside the body of a function.
297 # If set to NO (the default) these blocks will be appended to the
298 # function's detailed documentation block.
300 HIDE_IN_BODY_DOCS = NO
302 # The INTERNAL_DOCS tag determines if documentation
303 # that is typed after a \internal command is included. If the tag is set
304 # to NO (the default) then the documentation will be excluded.
305 # Set it to YES to include the internal documentation.
309 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
310 # file names in lower-case letters. If set to YES upper-case letters are also
311 # allowed. This is useful if you have classes or files whose names only differ
312 # in case and if your file system supports case sensitive file names. Windows
313 # and Mac users are advised to set this option to NO.
315 CASE_SENSE_NAMES = YES
317 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
318 # will show members with their full class and namespace scopes in the
319 # documentation. If set to YES the scope will be hidden.
321 HIDE_SCOPE_NAMES = NO
323 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
324 # will put a list of the files that are included by a file in the documentation
327 SHOW_INCLUDE_FILES = YES
329 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
330 # is inserted in the documentation for inline members.
334 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
335 # will sort the (detailed) documentation of file and class members
336 # alphabetically by member name. If set to NO the members will appear in
339 SORT_MEMBER_DOCS = YES
341 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
342 # brief documentation of file, namespace and class members alphabetically
343 # by member name. If set to NO (the default) the members will appear in
348 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
349 # sorted by fully-qualified names, including namespaces. If set to
350 # NO (the default), the class list will be sorted only by class name,
351 # not including the namespace part.
352 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
353 # Note: This option applies only to the class list, not to the
356 SORT_BY_SCOPE_NAME = NO
358 # The GENERATE_TODOLIST tag can be used to enable (YES) or
359 # disable (NO) the todo list. This list is created by putting \todo
360 # commands in the documentation.
362 GENERATE_TODOLIST = YES
364 # The GENERATE_TESTLIST tag can be used to enable (YES) or
365 # disable (NO) the test list. This list is created by putting \test
366 # commands in the documentation.
368 GENERATE_TESTLIST = YES
370 # The GENERATE_BUGLIST tag can be used to enable (YES) or
371 # disable (NO) the bug list. This list is created by putting \bug
372 # commands in the documentation.
374 GENERATE_BUGLIST = YES
376 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
377 # disable (NO) the deprecated list. This list is created by putting
378 # \deprecated commands in the documentation.
380 GENERATE_DEPRECATEDLIST= YES
382 # The ENABLED_SECTIONS tag can be used to enable conditional
383 # documentation sections, marked by \if sectionname ... \endif.
387 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
388 # the initial value of a variable or define consists of for it to appear in
389 # the documentation. If the initializer consists of more lines than specified
390 # here it will be hidden. Use a value of 0 to hide initializers completely.
391 # The appearance of the initializer of individual variables and defines in the
392 # documentation can be controlled using \showinitializer or \hideinitializer
393 # command in the documentation regardless of this setting.
395 MAX_INITIALIZER_LINES = 30
397 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
398 # at the bottom of the documentation of classes and structs. If set to YES the
399 # list will mention the files that were used to generate the documentation.
401 SHOW_USED_FILES = YES
403 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
404 # doxygen should invoke to get the current version for each file (typically from the
405 # version control system). Doxygen will invoke the program by executing (via
406 # popen()) the command <command> <input-file>, where <command> is the value of
407 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
408 # provided by doxygen. Whatever the program writes to standard output
409 # is used as the file version. See the manual for examples.
411 FILE_VERSION_FILTER =
413 #---------------------------------------------------------------------------
414 # configuration options related to warning and progress messages
415 #---------------------------------------------------------------------------
417 # The QUIET tag can be used to turn on/off the messages that are generated
418 # by doxygen. Possible values are YES and NO. If left blank NO is used.
422 # The WARNINGS tag can be used to turn on/off the warning messages that are
423 # generated by doxygen. Possible values are YES and NO. If left blank
428 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
429 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
430 # automatically be disabled.
432 WARN_IF_UNDOCUMENTED = YES
434 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
435 # potential errors in the documentation, such as not documenting some
436 # parameters in a documented function, or documenting parameters that
437 # don't exist or using markup commands wrongly.
439 WARN_IF_DOC_ERROR = YES
441 # This WARN_NO_PARAMDOC option can be abled to get warnings for
442 # functions that are documented, but have no documentation for their parameters
443 # or return value. If set to NO (the default) doxygen will only warn about
444 # wrong or incomplete parameter documentation, but not about the absence of
447 WARN_NO_PARAMDOC = NO
449 # The WARN_FORMAT tag determines the format of the warning messages that
450 # doxygen can produce. The string should contain the $file, $line, and $text
451 # tags, which will be replaced by the file and line number from which the
452 # warning originated and the warning text. Optionally the format may contain
453 # $version, which will be replaced by the version of the file (if it could
454 # be obtained via FILE_VERSION_FILTER)
456 WARN_FORMAT = "$file:$line: $text "
458 # The WARN_LOGFILE tag can be used to specify a file to which warning
459 # and error messages should be written. If left blank the output is written
464 #---------------------------------------------------------------------------
465 # configuration options related to the input files
466 #---------------------------------------------------------------------------
468 # The INPUT tag can be used to specify the files and/or directories that contain
469 # documented source files. You may enter file names like "myfile.cpp" or
470 # directories like "/usr/src/myproject". Separate the files or directories
476 # This tag can be used to specify the character encoding of the source files that
477 # doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default
478 # input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding.
479 # See http://www.gnu.org/software/libiconv for the list of possible encodings.
481 INPUT_ENCODING = UTF-8
483 # If the value of the INPUT tag contains directories, you can use the
484 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
485 # and *.h) to filter out the source-files in the directories. If left
486 # blank the following patterns are tested:
487 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
488 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
492 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
493 # should be searched for input files as well. Possible values are YES and NO.
494 # If left blank NO is used.
498 # The EXCLUDE tag can be used to specify files and/or directories that should
499 # excluded from the INPUT source files. This way you can easily exclude a
500 # subdirectory from a directory tree whose root is specified with the INPUT tag.
504 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
505 # directories that are symbolic links (a Unix filesystem feature) are excluded
508 EXCLUDE_SYMLINKS = NO
510 # If the value of the INPUT tag contains directories, you can use the
511 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
512 # certain files from those directories. Note that the wildcards are matched
513 # against the file with absolute path, so to exclude all test directories
514 # for example use the pattern */test/*
516 EXCLUDE_PATTERNS = ex_*.cpp \
519 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
520 # (namespaces, classes, functions, etc.) that should be excluded from the output.
521 # The symbol name can be a fully qualified name, a word, or if the wildcard * is used,
522 # a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
526 # The EXAMPLE_PATH tag can be used to specify one or more files or
527 # directories that contain example code fragments that are included (see
528 # the \include command).
532 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
533 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
534 # and *.h) to filter out the source-files in the directories. If left
535 # blank all files are included.
539 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
540 # searched for input files to be used with the \include or \dontinclude
541 # commands irrespective of the value of the RECURSIVE tag.
542 # Possible values are YES and NO. If left blank NO is used.
544 EXAMPLE_RECURSIVE = NO
546 # The IMAGE_PATH tag can be used to specify one or more files or
547 # directories that contain image that are included in the documentation (see
548 # the \image command).
552 # The INPUT_FILTER tag can be used to specify a program that doxygen should
553 # invoke to filter for each input file. Doxygen will invoke the filter program
554 # by executing (via popen()) the command <filter> <input-file>, where <filter>
555 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
556 # input file. Doxygen will then use the output that the filter program writes
557 # to standard output. If FILTER_PATTERNS is specified, this tag will be
562 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
563 # basis. Doxygen will compare the file name with each pattern and apply the
564 # filter if there is a match. The filters are a list of the form:
565 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
566 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
567 # is applied to all files.
571 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
572 # INPUT_FILTER) will be used to filter the input files when producing source
573 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
575 FILTER_SOURCE_FILES = NO
577 #---------------------------------------------------------------------------
578 # configuration options related to source browsing
579 #---------------------------------------------------------------------------
581 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
582 # be generated. Documented entities will be cross-referenced with these sources.
583 # Note: To get rid of all source code in the generated output, make sure also
584 # VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH
585 # then you must also enable this option. If you don't then doxygen will produce
586 # a warning and turn it on anyway
590 # Setting the INLINE_SOURCES tag to YES will include the body
591 # of functions and classes directly in the documentation.
595 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
596 # doxygen to hide any special comment blocks from generated source code
597 # fragments. Normal C and C++ comments will always remain visible.
599 STRIP_CODE_COMMENTS = YES
601 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
602 # then for each documented function all documented
603 # functions referencing it will be listed.
605 REFERENCED_BY_RELATION = YES
607 # If the REFERENCES_RELATION tag is set to YES (the default)
608 # then for each documented function all documented entities
609 # called/used by that function will be listed.
611 REFERENCES_RELATION = YES
613 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
614 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
615 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
616 # link to the source code. Otherwise they will link to the documentstion.
618 REFERENCES_LINK_SOURCE = YES
620 # If the USE_HTAGS tag is set to YES then the references to source code
621 # will point to the HTML generated by the htags(1) tool instead of doxygen
622 # built-in source browser. The htags tool is part of GNU's global source
623 # tagging system (see http://www.gnu.org/software/global/global.html). You
624 # will need version 4.8.6 or higher.
628 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
629 # will generate a verbatim copy of the header file for each class for
630 # which an include is specified. Set to NO to disable this.
632 VERBATIM_HEADERS = YES
634 #---------------------------------------------------------------------------
635 # configuration options related to the alphabetical class index
636 #---------------------------------------------------------------------------
638 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
639 # of all compounds will be generated. Enable this if the project
640 # contains a lot of classes, structs, unions or interfaces.
642 ALPHABETICAL_INDEX = YES
644 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
645 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
646 # in which this list will be split (can be a number in the range [1..20])
648 COLS_IN_ALPHA_INDEX = 5
650 # In case all classes in a project start with a common prefix, all
651 # classes will be put under the same header in the alphabetical index.
652 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
653 # should be ignored while generating the index headers.
657 #---------------------------------------------------------------------------
658 # configuration options related to the HTML output
659 #---------------------------------------------------------------------------
661 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
662 # generate HTML output.
666 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
667 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
668 # put in front of it. If left blank `html' will be used as the default path.
672 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
673 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
674 # doxygen will generate files with .html extension.
676 HTML_FILE_EXTENSION = .html
678 # The HTML_HEADER tag can be used to specify a personal HTML header for
679 # each generated HTML page. If it is left blank doxygen will generate a
684 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
685 # each generated HTML page. If it is left blank doxygen will generate a
690 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
691 # style sheet that is used by each HTML page. It can be used to
692 # fine-tune the look of the HTML output. If the tag is left blank doxygen
693 # will generate a default style sheet. Note that doxygen will try to copy
694 # the style sheet file to the HTML output directory, so don't put your own
695 # stylesheet in the HTML output directory as well, or it will be erased!
699 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
700 # will be generated that can be used as input for tools like the
701 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
702 # of the generated HTML documentation.
704 GENERATE_HTMLHELP = NO
706 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
707 # documentation will contain sections that can be hidden and shown after the
708 # page has loaded. For this to work a browser that supports
709 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
710 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
712 HTML_DYNAMIC_SECTIONS = NO
714 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
715 # be used to specify the file name of the resulting .chm file. You
716 # can add a path in front of the file if the result should not be
717 # written to the html output directory.
721 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
722 # be used to specify the location (absolute path including file name) of
723 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
724 # the HTML help compiler on the generated index.hhp.
728 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
729 # controls if a separate .chi index file is generated (YES) or that
730 # it should be included in the master .chm file (NO).
734 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
735 # controls whether a binary table of contents is generated (YES) or a
736 # normal table of contents (NO) in the .chm file.
740 # The TOC_EXPAND flag can be set to YES to add extra items for group members
741 # to the contents of the HTML help documentation and to the tree view.
745 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
746 # top of each HTML page. The value NO (the default) enables the index and
747 # the value YES disables it.
751 # This tag can be used to set the number of enum values (range [1..20])
752 # that doxygen will group on one line in the generated HTML documentation.
754 ENUM_VALUES_PER_LINE = 4
756 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
757 # generated containing a tree-like index structure (just like the one that
758 # is generated for HTML Help). For this to work a browser that supports
759 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
760 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
761 # probably better off using the HTML help feature.
763 GENERATE_TREEVIEW = NO
765 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
766 # used to set the initial width (in pixels) of the frame in which the tree
771 #---------------------------------------------------------------------------
772 # configuration options related to the LaTeX output
773 #---------------------------------------------------------------------------
775 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
776 # generate Latex output.
780 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
781 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
782 # put in front of it. If left blank `latex' will be used as the default path.
786 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
787 # invoked. If left blank `latex' will be used as the default command name.
789 LATEX_CMD_NAME = latex
791 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
792 # generate index for LaTeX. If left blank `makeindex' will be used as the
793 # default command name.
795 MAKEINDEX_CMD_NAME = makeindex
797 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
798 # LaTeX documents. This may be useful for small projects and may help to
799 # save some trees in general.
803 # The PAPER_TYPE tag can be used to set the paper type that is used
804 # by the printer. Possible values are: a4, a4wide, letter, legal and
805 # executive. If left blank a4wide will be used.
809 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
810 # packages that should be included in the LaTeX output.
814 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
815 # the generated latex document. The header should contain everything until
816 # the first chapter. If it is left blank doxygen will generate a
817 # standard header. Notice: only use this tag if you know what you are doing!
821 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
822 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
823 # contain links (just like the HTML output) instead of page references
824 # This makes the output suitable for online browsing using a pdf viewer.
828 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
829 # plain latex in the generated Makefile. Set this option to YES to get a
830 # higher quality PDF documentation.
834 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
835 # command to the generated LaTeX files. This will instruct LaTeX to keep
836 # running if errors occur, instead of asking the user for help.
837 # This option is also used when generating formulas in HTML.
841 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
842 # include the index chapters (such as File Index, Compound Index, etc.)
845 LATEX_HIDE_INDICES = NO
847 #---------------------------------------------------------------------------
848 # configuration options related to the RTF output
849 #---------------------------------------------------------------------------
851 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
852 # The RTF output is optimized for Word 97 and may not look very pretty with
853 # other RTF readers or editors.
857 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
858 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
859 # put in front of it. If left blank `rtf' will be used as the default path.
863 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
864 # RTF documents. This may be useful for small projects and may help to
865 # save some trees in general.
869 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
870 # will contain hyperlink fields. The RTF file will
871 # contain links (just like the HTML output) instead of page references.
872 # This makes the output suitable for online browsing using WORD or other
873 # programs which support those fields.
874 # Note: wordpad (write) and others do not support links.
878 # Load stylesheet definitions from file. Syntax is similar to doxygen's
879 # config file, i.e. a series of assignments. You only have to provide
880 # replacements, missing definitions are set to their default value.
882 RTF_STYLESHEET_FILE =
884 # Set optional variables used in the generation of an rtf document.
885 # Syntax is similar to doxygen's config file.
887 RTF_EXTENSIONS_FILE =
889 #---------------------------------------------------------------------------
890 # configuration options related to the man page output
891 #---------------------------------------------------------------------------
893 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
898 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
899 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
900 # put in front of it. If left blank `man' will be used as the default path.
904 # The MAN_EXTENSION tag determines the extension that is added to
905 # the generated man pages (default is the subroutine's section .3)
909 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
910 # then it will generate one additional man file for each entity
911 # documented in the real man page(s). These additional files
912 # only source the real man page, but without them the man command
913 # would be unable to find the correct page. The default is NO.
917 #---------------------------------------------------------------------------
918 # configuration options related to the XML output
919 #---------------------------------------------------------------------------
921 # If the GENERATE_XML tag is set to YES Doxygen will
922 # generate an XML file that captures the structure of
923 # the code including all documentation.
927 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
928 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
929 # put in front of it. If left blank `xml' will be used as the default path.
933 # The XML_SCHEMA tag can be used to specify an XML schema,
934 # which can be used by a validating XML parser to check the
935 # syntax of the XML files.
939 # The XML_DTD tag can be used to specify an XML DTD,
940 # which can be used by a validating XML parser to check the
941 # syntax of the XML files.
945 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
946 # dump the program listings (including syntax highlighting
947 # and cross-referencing information) to the XML output. Note that
948 # enabling this will significantly increase the size of the XML output.
950 XML_PROGRAMLISTING = YES
952 #---------------------------------------------------------------------------
953 # configuration options for the AutoGen Definitions output
954 #---------------------------------------------------------------------------
956 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
957 # generate an AutoGen Definitions (see autogen.sf.net) file
958 # that captures the structure of the code including all
959 # documentation. Note that this feature is still experimental
960 # and incomplete at the moment.
962 GENERATE_AUTOGEN_DEF = NO
964 #---------------------------------------------------------------------------
965 # configuration options related to the Perl module output
966 #---------------------------------------------------------------------------
968 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
969 # generate a Perl module file that captures the structure of
970 # the code including all documentation. Note that this
971 # feature is still experimental and incomplete at the
974 GENERATE_PERLMOD = NO
976 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
977 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
978 # to generate PDF and DVI output from the Perl module output.
982 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
983 # nicely formatted so it can be parsed by a human reader. This is useful
984 # if you want to understand what is going on. On the other hand, if this
985 # tag is set to NO the size of the Perl module output will be much smaller
986 # and Perl will parse it just the same.
990 # The names of the make variables in the generated doxyrules.make file
991 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
992 # This is useful so different doxyrules.make files included by the same
993 # Makefile don't overwrite each other's variables.
995 PERLMOD_MAKEVAR_PREFIX =
997 #---------------------------------------------------------------------------
998 # Configuration options related to the preprocessor
999 #---------------------------------------------------------------------------
1001 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1002 # evaluate all C-preprocessor directives found in the sources and include
1005 ENABLE_PREPROCESSING = YES
1007 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1008 # names in the source code. If set to NO (the default) only conditional
1009 # compilation will be performed. Macro expansion can be done in a controlled
1010 # way by setting EXPAND_ONLY_PREDEF to YES.
1012 MACRO_EXPANSION = YES
1014 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1015 # then the macro expansion is limited to the macros specified with the
1016 # PREDEFINED and EXPAND_AS_DEFINED tags.
1018 EXPAND_ONLY_PREDEF = YES
1020 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1021 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1023 SEARCH_INCLUDES = YES
1025 # The INCLUDE_PATH tag can be used to specify one or more directories that
1026 # contain include files that are not input files but should be processed by
1031 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1032 # patterns (like *.h and *.hpp) to filter out the header-files in the
1033 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1036 INCLUDE_FILE_PATTERNS =
1038 # The PREDEFINED tag can be used to specify one or more macro names that
1039 # are defined before the preprocessor is started (similar to the -D option of
1040 # gcc). The argument of the tag is a list of macros of the form: name
1041 # or name=definition (no spaces). If the definition and the = are
1042 # omitted =1 is assumed. To prevent a macro definition from being
1043 # undefined via #undef or recursively expanded use the := operator
1044 # instead of the = operator.
1046 PREDEFINED = "YAZ_BEGIN_CDECL= " \
1050 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1051 # this tag can be used to specify a list of macro names that should be expanded.
1052 # The macro definition that is found in the sources will be used.
1053 # Use the PREDEFINED tag if you want to use a different macro definition.
1055 EXPAND_AS_DEFINED = YAZ_BEGIN_CDECL \
1059 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1060 # doxygen's preprocessor will remove all function-like macros that are alone
1061 # on a line, have an all uppercase name, and do not end with a semicolon. Such
1062 # function macros are typically used for boiler-plate code, and will confuse
1063 # the parser if not removed.
1065 SKIP_FUNCTION_MACROS = YES
1067 #---------------------------------------------------------------------------
1068 # Configuration::additions related to external references
1069 #---------------------------------------------------------------------------
1071 # The TAGFILES option can be used to specify one or more tagfiles.
1072 # Optionally an initial location of the external documentation
1073 # can be added for each tagfile. The format of a tag file without
1074 # this location is as follows:
1075 # TAGFILES = file1 file2 ...
1076 # Adding location for the tag files is done as follows:
1077 # TAGFILES = file1=loc1 "file2 = loc2" ...
1078 # where "loc1" and "loc2" can be relative or absolute paths or
1079 # URLs. If a location is present for each tag, the installdox tool
1080 # does not have to be run to correct the links.
1081 # Note that each tag file must have a unique name
1082 # (where the name does NOT include the path)
1083 # If a tag file is not located in the directory in which doxygen
1084 # is run, you must also specify the path to the tagfile here.
1088 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1089 # a tag file that is based on the input files it reads.
1093 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1094 # in the class index. If set to NO only the inherited external classes
1099 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1100 # in the modules index. If set to NO, only the current project's groups will
1103 EXTERNAL_GROUPS = YES
1105 # The PERL_PATH should be the absolute path and name of the perl script
1106 # interpreter (i.e. the result of `which perl').
1108 PERL_PATH = /usr/bin/perl
1110 #---------------------------------------------------------------------------
1111 # Configuration options related to the dot tool
1112 #---------------------------------------------------------------------------
1114 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1115 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1116 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1117 # this option is superseded by the HAVE_DOT option below. This is only a
1118 # fallback. It is recommended to install and use dot, since it yields more
1121 CLASS_DIAGRAMS = YES
1123 # You can define message sequence charts within doxygen comments using the \msc
1124 # command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to
1125 # produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to
1126 # specify the directory where the mscgen tool resides. If left empty the tool is assumed to
1127 # be found in the default search path.
1131 # If set to YES, the inheritance and collaboration graphs will hide
1132 # inheritance and usage relations if the target is undocumented
1133 # or is not a class.
1135 HIDE_UNDOC_RELATIONS = YES
1137 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1138 # available from the path. This tool is part of Graphviz, a graph visualization
1139 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1140 # have no effect if this option is set to NO (the default)
1144 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1145 # will generate a graph for each documented class showing the direct and
1146 # indirect inheritance relations. Setting this tag to YES will force the
1147 # the CLASS_DIAGRAMS tag to NO.
1151 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1152 # will generate a graph for each documented class showing the direct and
1153 # indirect implementation dependencies (inheritance, containment, and
1154 # class references variables) of the class with other documented classes.
1156 COLLABORATION_GRAPH = YES
1158 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1159 # will generate a graph for groups, showing the direct groups dependencies
1163 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1164 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1169 # If set to YES, the inheritance and collaboration graphs will show the
1170 # relations between templates and their instances.
1172 TEMPLATE_RELATIONS = YES
1174 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1175 # tags are set to YES then doxygen will generate a graph for each documented
1176 # file showing the direct and indirect include dependencies of the file with
1177 # other documented files.
1181 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1182 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1183 # documented header file showing the documented files that directly or
1184 # indirectly include this file.
1186 INCLUDED_BY_GRAPH = YES
1188 # If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will
1189 # generate a call dependency graph for every global function or class method.
1190 # Note that enabling this option will significantly increase the time of a run.
1191 # So in most cases it will be better to enable call graphs for selected
1192 # functions only using the \callgraph command.
1196 # If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will
1197 # generate a caller dependency graph for every global function or class method.
1198 # Note that enabling this option will significantly increase the time of a run.
1199 # So in most cases it will be better to enable caller graphs for selected
1200 # functions only using the \callergraph command.
1204 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1205 # will graphical hierarchy of all classes instead of a textual one.
1207 GRAPHICAL_HIERARCHY = YES
1209 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1210 # then doxygen will show the dependencies a directory has on other directories
1211 # in a graphical way. The dependency relations are determined by the #include
1212 # relations between the files in the directories.
1214 DIRECTORY_GRAPH = YES
1216 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1217 # generated by dot. Possible values are png, jpg, or gif
1218 # If left blank png will be used.
1220 DOT_IMAGE_FORMAT = png
1222 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1223 # found. If left blank, it is assumed the dot tool can be found in the path.
1227 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1228 # contain dot files that are included in the documentation (see the
1229 # \dotfile command).
1233 # The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1234 # nodes that will be shown in the graph. If the number of nodes in a graph
1235 # becomes larger than this value, doxygen will truncate the graph, which is
1236 # visualized by representing a node as a red box. Note that doxygen if the number
1237 # of direct children of the root node in a graph is already larger than
1238 # MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note
1239 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1241 DOT_GRAPH_MAX_NODES = 50
1243 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1244 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1245 # from the root by following a path via at most 3 edges will be shown. Nodes
1246 # that lay further from the root node will be omitted. Note that setting this
1247 # option to 1 or 2 may greatly reduce the computation time needed for large
1248 # code bases. Also note that the size of a graph can be further restricted by
1249 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1251 MAX_DOT_GRAPH_DEPTH = 0
1253 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1254 # background. This is disabled by default, which results in a white background.
1255 # Warning: Depending on the platform used, enabling this option may lead to
1256 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1259 DOT_TRANSPARENT = YES
1261 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1262 # files in one run (i.e. multiple -o and -T options on the command line). This
1263 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1264 # support this, this feature is disabled by default.
1266 DOT_MULTI_TARGETS = NO
1268 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1269 # generate a legend page explaining the meaning of the various boxes and
1270 # arrows in the dot generated graphs.
1272 GENERATE_LEGEND = YES
1274 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1275 # remove the intermediate dot files that are used to generate
1276 # the various graphs.
1280 #---------------------------------------------------------------------------
1281 # Configuration::additions related to the search engine
1282 #---------------------------------------------------------------------------
1284 # The SEARCHENGINE tag specifies whether or not a search engine should be
1285 # used. If set to NO the values of all tags below this one will be ignored.