From: Adam Dickmeiss <adam@indexdata.dk>
Date: Sun, 3 Oct 2004 22:34:07 +0000 (+0000)
Subject: Initial work for Doxygen based YAZ reference
X-Git-Tag: YAZ.2.0.28~36
X-Git-Url: http://sru.miketaylor.org.uk/cgi-bin?a=commitdiff_plain;h=f53079fadcadb1eeef45e1e6d254801d984d6068;p=yaz-moved-to-github.git

Initial work for Doxygen based YAZ reference
---

diff --git a/.cvsignore b/.cvsignore
index ae7cd02..78164f8 100644
--- a/.cvsignore
+++ b/.cvsignore
@@ -8,4 +8,5 @@ configure
 libtool
 yaz-config
 yaz.spec
+Doxyfile
 autom4te.cache
diff --git a/Doxyfile.in b/Doxyfile.in
new file mode 100644
index 0000000..052549a
--- /dev/null
+++ b/Doxyfile.in
@@ -0,0 +1,1153 @@
+# Doxyfile 1.3.8
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = YAZ
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
+# This could be handy for archiving the generated documentation or 
+# if some version control system is used.
+
+PROJECT_NUMBER         = @VERSION@
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
+# base path where the generated documentation will be put. 
+# If a relative path is entered, it will be relative to the location 
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = dox
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
+# 4096 sub-directories (in 2 levels) under the output directory of each output 
+# format and will distribute the generated files over these directories. 
+# Enabling this option can be useful when feeding doxygen a huge amount of source 
+# files, where putting all generated files in the same directory would otherwise 
+# cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
+# documentation generated by doxygen is written. Doxygen will use this 
+# information to generate all constant output in the proper language. 
+# The default language is English, other supported languages are: 
+# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
+# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
+# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
+# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
+# Swedish, and Ukrainian.
+
+OUTPUT_LANGUAGE        = English
+
+# This tag can be used to specify the encoding used in the generated output. 
+# The encoding is not always determined by the language that is chosen, 
+# but also whether or not the output is meant for Windows or non-Windows users. 
+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
+# forces the Windows encoding (this is the default for the Windows binary), 
+# whereas setting the tag to NO uses a Unix-style encoding (the default for 
+# all platforms other than Windows).
+
+USE_WINDOWS_ENCODING   = NO
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
+# include brief member descriptions after the members that are listed in 
+# the file and class documentation (similar to JavaDoc). 
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
+# the brief description of a member or function before the detailed description. 
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator 
+# that is used to form the text in various listings. Each string 
+# in this list, if found as the leading text of the brief description, will be 
+# stripped from the text and the result after processing the whole list, is used 
+# as the annotated text. Otherwise, the brief description is used as-is. If left 
+# blank, the following values are used ("$name" is automatically replaced with the 
+# name of the entity): "The $name class" "The $name widget" "The $name file" 
+# "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = 
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
+# Doxygen will generate a detailed section even if there is only a brief 
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
+# members of a class in the documentation of that class as if those members were 
+# ordinary class members. Constructors, destructors and assignment operators of 
+# the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
+# path before files name in the file list and in the header files. If set 
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
+# can be used to strip a user-defined part of the path. Stripping is 
+# only done if one of the specified strings matches the left-hand part of 
+# the path. The tag can be used to show relative paths in the file list. 
+# If left blank the directory from which doxygen is run is used as the 
+# path to strip.
+
+STRIP_FROM_PATH        = 
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
+# the path mentioned in the documentation of a class, which tells 
+# the reader which header file to include in order to use a class. 
+# If left blank only the name of the header file containing the class 
+# definition is used. Otherwise one should specify the include paths that 
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    = 
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
+# (but less readable) file names. This can be useful is your file systems 
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
+# will interpret the first line (until the first dot) of a JavaDoc-style 
+# comment as the brief description. If set to NO, the JavaDoc 
+# comments will behave just like the Qt-style comments (thus requiring an 
+# explicit @brief command for a brief description.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
+# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
+# comments) as a brief description. This used to be the default behaviour. 
+# The new default is to treat a multi-line C++ comment block as a detailed 
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member 
+# documentation.
+
+DETAILS_AT_TOP         = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
+# member inherits the documentation from any documented member that it 
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
+# tag is set to YES, then doxygen will reuse the documentation of the first 
+# member in the group (if any) for the other members of the group. By default 
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that acts 
+# as commands in the documentation. An alias has the form "name=value". 
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
+# put the command \sideeffect (or @sideeffect) in the documentation, which 
+# will result in a user-defined paragraph with heading "Side Effects:". 
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                = 
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
+# only. Doxygen will then generate output that is more tailored for C. 
+# For instance, some of the names that are used will be different. The list 
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = NO
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
+# only. Doxygen will then generate output that is more tailored for Java. 
+# For instance, namespaces will be presented as packages, qualified scopes 
+# will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
+# the same type (for instance a group of public functions) to be put as a 
+# subgroup of that type (e.g. under the Public Functions section). Set it to 
+# NO to prevent subgrouping. Alternatively, this can be done per class using 
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
+# documentation are documented, even if no documentation was available. 
+# Private class members and static file members will be hidden unless 
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file 
+# will be included in the documentation.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
+# defined locally in source files will be included in the documentation. 
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local 
+# methods, which are defined in the implementation section but not in 
+# the interface are included in the documentation. 
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
+# undocumented members of documented classes, files or namespaces. 
+# If set to NO (the default) these members will be included in the 
+# various overviews, but no documentation section is generated. 
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
+# undocumented classes that are normally visible in the class hierarchy. 
+# If set to NO (the default) these classes will be included in the various 
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
+# friend (class|struct|union) declarations. 
+# If set to NO (the default) these declarations will be included in the 
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
+# documentation blocks found inside the body of a function. 
+# If set to NO (the default) these blocks will be appended to the 
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation 
+# that is typed after a \internal command is included. If the tag is set 
+# to NO (the default) then the documentation will be excluded. 
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
+# file names in lower-case letters. If set to YES upper-case letters are also 
+# allowed. This is useful if you have classes or files whose names only differ 
+# in case and if your file system supports case sensitive file names. Windows 
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
+# will show members with their full class and namespace scopes in the 
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
+# will put a list of the files that are included by a file in the documentation 
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
+# will sort the (detailed) documentation of file and class members 
+# alphabetically by member name. If set to NO the members will appear in 
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
+# brief documentation of file, namespace and class members alphabetically 
+# by member name. If set to NO (the default) the members will appear in 
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
+# sorted by fully-qualified names, including namespaces. If set to 
+# NO (the default), the class list will be sorted only by class name, 
+# not including the namespace part. 
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the 
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or 
+# disable (NO) the todo list. This list is created by putting \todo 
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or 
+# disable (NO) the test list. This list is created by putting \test 
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or 
+# disable (NO) the bug list. This list is created by putting \bug 
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
+# disable (NO) the deprecated list. This list is created by putting 
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional 
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       = 
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
+# the initial value of a variable or define consists of for it to appear in 
+# the documentation. If the initializer consists of more lines than specified 
+# here it will be hidden. Use a value of 0 to hide initializers completely. 
+# The appearance of the initializer of individual variables and defines in the 
+# documentation can be controlled using \showinitializer or \hideinitializer 
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
+# at the bottom of the documentation of classes and structs. If set to YES the 
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated 
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are 
+# generated by doxygen. Possible values are YES and NO. If left blank 
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
+# potential errors in the documentation, such as not documenting some 
+# parameters in a documented function, or documenting parameters that 
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that 
+# doxygen can produce. The string should contain the $file, $line, and $text 
+# tags, which will be replaced by the file and line number from which the 
+# warning originated and the warning text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning 
+# and error messages should be written. If left blank the output is written 
+# to stderr.
+
+WARN_LOGFILE           = 
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain 
+# documented source files. You may enter file names like "myfile.cpp" or 
+# directories like "/usr/src/myproject". Separate the files or directories 
+# with spaces.
+
+INPUT                  = src include
+
+# If the value of the INPUT tag contains directories, you can use the 
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
+# and *.h) to filter out the source-files in the directories. If left 
+# blank the following patterns are tested: 
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp 
+# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
+
+FILE_PATTERNS          = 
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
+# should be searched for input files as well. Possible values are YES and NO. 
+# If left blank NO is used.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should 
+# excluded from the INPUT source files. This way you can easily exclude a 
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                = 
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories 
+# that are symbolic links (a Unix filesystem feature) are excluded from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the 
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
+# certain files from those directories.
+
+EXCLUDE_PATTERNS       = 
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or 
+# directories that contain example code fragments that are included (see 
+# the \include command).
+
+EXAMPLE_PATH           = 
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
+# and *.h) to filter out the source-files in the directories. If left 
+# blank all files are included.
+
+EXAMPLE_PATTERNS       = 
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
+# searched for input files to be used with the \include or \dontinclude 
+# commands irrespective of the value of the RECURSIVE tag. 
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or 
+# directories that contain image that are included in the documentation (see 
+# the \image command).
+
+IMAGE_PATH             = 
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should 
+# invoke to filter for each input file. Doxygen will invoke the filter program 
+# by executing (via popen()) the command <filter> <input-file>, where <filter> 
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
+# input file. Doxygen will then use the output that the filter program writes 
+# to standard output.  If FILTER_PATTERNS is specified, this tag will be 
+# ignored.
+
+INPUT_FILTER           = 
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
+# basis.  Doxygen will compare the file name with each pattern and apply the 
+# filter if there is a match.  The filters are a list of the form: 
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
+# is applied to all files.
+
+FILTER_PATTERNS        = 
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
+# INPUT_FILTER) will be used to filter the input files when producing source 
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
+# be generated. Documented entities will be cross-referenced with these sources. 
+# Note: To get rid of all source code in the generated output, make sure also 
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body 
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
+# doxygen to hide any special comment blocks from generated source code 
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES (the default) 
+# then for each documented function all documented 
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES (the default) 
+# then for each documented function all documented entities 
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
+# will generate a verbatim copy of the header file for each class for 
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
+# of all compounds will be generated. Enable this if the project 
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all 
+# classes will be put under the same header in the alphabetical index. 
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          = 
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for 
+# each generated HTML page. If it is left blank doxygen will generate a 
+# standard header.
+
+HTML_HEADER            = 
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
+# each generated HTML page. If it is left blank doxygen will generate a 
+# standard footer.
+
+HTML_FOOTER            = 
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
+# style sheet that is used by each HTML page. It can be used to 
+# fine-tune the look of the HTML output. If the tag is left blank doxygen 
+# will generate a default style sheet. Note that doxygen will try to copy 
+# the style sheet file to the HTML output directory, so don't put your own 
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        = 
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
+# files or namespaces will be aligned in HTML using tables. If set to 
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
+# will be generated that can be used as input for tools like the 
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
+# be used to specify the file name of the resulting .chm file. You 
+# can add a path in front of the file if the result should not be 
+# written to the html output directory.
+
+CHM_FILE               = 
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
+# be used to specify the location (absolute path including file name) of 
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           = 
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
+# controls if a separate .chi index file is generated (YES) or that 
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
+# controls whether a binary table of contents is generated (YES) or a 
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members 
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
+# top of each HTML page. The value NO (the default) enables the index and 
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20]) 
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
+# generated containing a tree-like index structure (just like the one that 
+# is generated for HTML Help). For this to work a browser that supports 
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
+# probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
+# used to set the initial width (in pixels) of the frame in which the tree 
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
+# generate Latex output.
+
+GENERATE_LATEX         = YES
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
+# invoked. If left blank `latex' will be used as the default command name.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
+# generate index for LaTeX. If left blank `makeindex' will be used as the 
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
+# LaTeX documents. This may be useful for small projects and may help to 
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used 
+# by the printer. Possible values are: a4, a4wide, letter, legal and 
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         = 
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
+# the generated latex document. The header should contain everything until 
+# the first chapter. If it is left blank doxygen will generate a 
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           = 
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
+# contain links (just like the HTML output) instead of page references 
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
+# plain latex in the generated Makefile. Set this option to YES to get a 
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
+# command to the generated LaTeX files. This will instruct LaTeX to keep 
+# running if errors occur, instead of asking the user for help. 
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not 
+# include the index chapters (such as File Index, Compound Index, etc.) 
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
+# The RTF output is optimized for Word 97 and may not look very pretty with 
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
+# RTF documents. This may be useful for small projects and may help to 
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
+# will contain hyperlink fields. The RTF file will 
+# contain links (just like the HTML output) instead of page references. 
+# This makes the output suitable for online browsing using WORD or other 
+# programs which support those fields. 
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's 
+# config file, i.e. a series of assignments. You only have to provide 
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    = 
+
+# Set optional variables used in the generation of an rtf document. 
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    = 
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to 
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
+# then it will generate one additional man file for each entity 
+# documented in the real man page(s). These additional files 
+# only source the real man page, but without them the man command 
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will 
+# generate an XML file that captures the structure of 
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. 
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema, 
+# which can be used by a validating XML parser to check the 
+# syntax of the XML files.
+
+XML_SCHEMA             = 
+
+# The XML_DTD tag can be used to specify an XML DTD, 
+# which can be used by a validating XML parser to check the 
+# syntax of the XML files.
+
+XML_DTD                = 
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
+# dump the program listings (including syntax highlighting 
+# and cross-referencing information) to the XML output. Note that 
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
+# generate an AutoGen Definitions (see autogen.sf.net) file 
+# that captures the structure of the code including all 
+# documentation. Note that this feature is still experimental 
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will 
+# generate a Perl module file that captures the structure of 
+# the code including all documentation. Note that this 
+# feature is still experimental and incomplete at the 
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able 
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
+# nicely formatted so it can be parsed by a human reader.  This is useful 
+# if you want to understand what is going on.  On the other hand, if this 
+# tag is set to NO the size of the Perl module output will be much smaller 
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file 
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
+# This is useful so different doxyrules.make files included by the same 
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX = 
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor   
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
+# evaluate all C-preprocessor directives found in the sources and include 
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
+# names in the source code. If set to NO (the default) only conditional 
+# compilation will be performed. Macro expansion can be done in a controlled 
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
+# then the macro expansion is limited to the macros specified with the 
+# PREDEFINED and EXPAND_AS_PREDEFINED tags.
+
+EXPAND_ONLY_PREDEF     = YES
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that 
+# contain include files that are not input files but should be processed by 
+# the preprocessor.
+
+INCLUDE_PATH           = 
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
+# patterns (like *.h and *.hpp) to filter out the header-files in the 
+# directories. If left blank, the patterns specified with FILE_PATTERNS will 
+# be used.
+
+INCLUDE_FILE_PATTERNS  = 
+
+# The PREDEFINED tag can be used to specify one or more macro names that 
+# are defined before the preprocessor is started (similar to the -D option of 
+# gcc). The argument of the tag is a list of macros of the form: name 
+# or name=definition (no spaces). If the definition and the = are 
+# omitted =1 is assumed.
+
+PREDEFINED             = "YAZ_BEGIN_CDECL= " "YAZ_END_CDECL=" "YAZ_EXPORT="
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
+# this tag can be used to specify a list of macro names that should be expanded. 
+# The macro definition that is found in the sources will be used. 
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      = YAZ_BEGIN_CDECL YAZ_END_CDECL YAZ_EXPORT
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
+# doxygen's preprocessor will remove all function-like macros that are alone 
+# on a line, have an all uppercase name, and do not end with a semicolon. Such 
+# function macros are typically used for boiler-plate code, and will confuse the 
+# parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references   
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles. 
+# Optionally an initial location of the external documentation 
+# can be added for each tagfile. The format of a tag file without 
+# this location is as follows: 
+#   TAGFILES = file1 file2 ... 
+# Adding location for the tag files is done as follows: 
+#   TAGFILES = file1=loc1 "file2 = loc2" ... 
+# where "loc1" and "loc2" can be relative or absolute paths or 
+# URLs. If a location is present for each tag, the installdox tool 
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen 
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               = 
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create 
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       = 
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed 
+# in the class index. If set to NO only the inherited external classes 
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
+# in the modules index. If set to NO, only the current project's groups will 
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script 
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool   
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or 
+# super classes. Setting the tag to NO turns the diagrams off. Note that this 
+# option is superseded by the HAVE_DOT option below. This is only a fallback. It is 
+# recommended to install and use dot, since it yields more powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# If set to YES, the inheritance and collaboration graphs will hide 
+# inheritance and usage relations if the target is undocumented 
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
+# available from the path. This tool is part of Graphviz, a graph visualization 
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section 
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = NO
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
+# will generate a graph for each documented class showing the direct and 
+# indirect inheritance relations. Setting this tag to YES will force the 
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
+# will generate a graph for each documented class showing the direct and 
+# indirect implementation dependencies (inheritance, containment, and 
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
+# collaboration diagrams in a style similar to the OMG's Unified Modeling 
+# Language.
+
+UML_LOOK               = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the 
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
+# tags are set to YES then doxygen will generate a graph for each documented 
+# file showing the direct and indirect include dependencies of the file with 
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
+# documented header file showing the documented files that directly or 
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
+# generate a call dependency graph for every global function or class method. 
+# Note that enabling this option will significantly increase the time of a run. 
+# So in most cases it will be better to enable call graphs for selected 
+# functions only using the \callgraph command.
+
+CALL_GRAPH             = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be 
+# found. If left blank, it is assumed the dot tool can be found on the path.
+
+DOT_PATH               = 
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that 
+# contain dot files that are included in the documentation (see the 
+# \dotfile command).
+
+DOTFILE_DIRS           = 
+
+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
+# this value, doxygen will try to truncate the graph, so that it fits within 
+# the specified constraint. Beware that most browsers cannot cope with very 
+# large images.
+
+MAX_DOT_GRAPH_WIDTH    = 1024
+
+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
+# this value, doxygen will try to truncate the graph, so that it fits within 
+# the specified constraint. Beware that most browsers cannot cope with very 
+# large images.
+
+MAX_DOT_GRAPH_HEIGHT   = 1024
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
+# graphs generated by dot. A depth value of 3 means that only nodes reachable 
+# from the root by following a path via at most 3 edges will be shown. Nodes that 
+# lay further from the root node will be omitted. Note that setting this option to 
+# 1 or 2 may greatly reduce the computation time needed for large code bases. Also 
+# note that a graph may be further truncated if the graph's image dimensions are 
+# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). 
+# If 0 is used for the depth value (the default), the graph is not depth-constrained.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
+# generate a legend page explaining the meaning of the various boxes and 
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
+# remove the intermediate dot files that are used to generate 
+# the various graphs.
+
+DOT_CLEANUP            = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine   
+#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be 
+# used. If set to NO the values of all tags below this one will be ignored.
+
+SEARCHENGINE           = NO
diff --git a/Makefile.am b/Makefile.am
index 0bcfd71..3e1b74f 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -1,6 +1,6 @@
 ## Copyright (C) 1994-2004, Index Data
 ## All rights reserved.
-## $Id: Makefile.am,v 1.28 2004-04-11 15:02:00 adam Exp $
+## $Id: Makefile.am,v 1.29 2004-10-03 22:34:07 adam Exp $
 
 AUTOMAKE_OPTIONS = foreign 
 
@@ -12,7 +12,7 @@ aclocal_DATA = yaz.m4
 
 SPEC_FILE=$(PACKAGE).spec
 EXTRA_DIST=$(SPEC_FILE) README LICENSE NEWS TODO windows.txt \
-	yaz-config.in yaz.m4 buildconf.sh
+	yaz-config.in yaz.m4 buildconf.sh Doxyfile.in
 
 dist-hook:
 	mkdir $(distdir)/win
diff --git a/configure.in b/configure.in
index 1d53a51..d91ca7d 100644
--- a/configure.in
+++ b/configure.in
@@ -1,6 +1,6 @@
 dnl YAZ Toolkit, Index Data 1994-2004
 dnl See the file LICENSE for details.
-dnl $Id: configure.in,v 1.155 2004-10-01 23:01:26 adam Exp $
+dnl $Id: configure.in,v 1.156 2004-10-03 22:34:07 adam Exp $
 AC_INIT(include/yaz/yaz-version.h)
 AM_INIT_AUTOMAKE(yaz, 2.0.26)
 AM_MAINTAINER_MODE
@@ -366,4 +366,5 @@ doc/tkl.xsl
 doc/yazhtml.xsl
 etc/Makefile
 yaz-config
+Doxyfile
 ],[sed s%yaz_echo_source=yes%yaz_echo_source=no%g < yaz-config > util/yaz-config && chmod +x yaz-config util/yaz-config])
diff --git a/include/yaz/ccl.h b/include/yaz/ccl.h
index 7724ace..fc36303 100644
--- a/include/yaz/ccl.h
+++ b/include/yaz/ccl.h
@@ -42,10 +42,14 @@
  *
  */
 
+/** \file ccl.h
+    \brief Header with public definitions about CCL.
+*/
+
 /*
  * CCL - header file
  *
- * $Id: ccl.h,v 1.18 2004-09-29 20:37:50 adam Exp $
+ * $Id: ccl.h,v 1.19 2004-10-03 22:34:07 adam Exp $
  *
  * Old Europagate Log:
  *
@@ -107,16 +111,22 @@ YAZ_BEGIN_CDECL
 #define CCL_ERR_TRUNC_NOT_BOTH   11
 #define CCL_ERR_TRUNC_NOT_RIGHT  12
     
-/* attribute pair (type, value) */
+/** attribute node (type, value) pair as used in RPN */
 struct ccl_rpn_attr {
+    /** next node */
     struct ccl_rpn_attr *next;
+    /** attribute set */
     char *set;
+    /** attribute type, Bib-1: 1=use, 2=relation, 3=position, .. */
     int type;
+    /** attribute value type (numeric or string) */
     int kind;
 #define CCL_RPN_ATTR_NUMERIC 1
 #define CCL_RPN_ATTR_STRING 2
     union {
+	/** numeric attribute value */
 	int numeric;
+	/** string attribute value */
 	char *str;
     } value;
 };
@@ -128,15 +138,19 @@ struct ccl_rpn_attr {
 #define CCL_RPN_SET 5
 #define CCL_RPN_PROX 6
 
-/* RPN tree structure */
+/** RPN tree structure node */
 struct ccl_rpn_node {
+    /** RPN tree node type */
     int kind;
     union {
+	/** Boolean including proximity 0=left, 2=right, 3=prox parms */
 	struct ccl_rpn_node *p[3];
+	/** Attributes + Term */
 	struct {
 	    char *term;
 	    struct ccl_rpn_attr *attr_list;
 	} t;
+	/** Result set */
 	char *setname;
     } u;
 };
@@ -202,7 +216,7 @@ typedef struct ccl_qualifiers *CCL_bibset;
 #define CCL_TOK_NOT   10
 #define CCL_TOK_SET   11
 
-/* CCL token */
+/** CCL token */
 struct ccl_token {
     char kind;
     size_t len;
@@ -211,7 +225,7 @@ struct ccl_token {
     struct ccl_token *prev;
 };
 
-/* CCL Qualifier */
+/** CCL Qualifier */
 struct ccl_qualifier {
     char *name;
     int no_sub;
@@ -220,130 +234,205 @@ struct ccl_qualifier {
     struct ccl_qualifier *next;
 };
 
+/** CCL parser structure */
 struct ccl_parser {
-/* current lookahead token */
+    /** current lookahead token */
     struct ccl_token *look_token;
     
-/* holds error code if error occur (and approx position of error) */
+    /** holds error code if error occur */
     int error_code;
+    /** if error occurs, this holds position (starting from 0). */
     const char *error_pos;
     
-/* current bibset */
+    /** current bibset */
     CCL_bibset bibset;
 
+    /** names of and operator */
     char *ccl_token_and;
+    /** names of or operator */
     char *ccl_token_or;
+    /** names of not operator */
     char *ccl_token_not;
+    /** names of set operator */
     char *ccl_token_set;
+    /** 1=CCL parser is case sensitive, 0=case insensitive */
     int ccl_case_sensitive;
 };
     
 typedef struct ccl_parser *CCL_parser;
     
-/* Generate tokens from command string - obeys all CCL opererators */
-YAZ_EXPORT struct ccl_token *ccl_parser_tokenize (CCL_parser cclp,
-				       const char *command);
-YAZ_EXPORT struct ccl_token *ccl_tokenize (const char *command);
+/**
+ * Splits CCL command string into individual tokens using
+ * a CCL parser.
+ */
+YAZ_EXPORT
+struct ccl_token *ccl_parser_tokenize (CCL_parser cclp, const char *command);
+
+/**
+ * Splits CCL command string into tokens using temporary parser.
+ *
+ * Use ccl_parser_tokenize instead and provide a parser - it is
+ * more flexible and efficient.
+ */
+YAZ_EXPORT
+struct ccl_token *ccl_tokenize (const char *command);
     
-/* Generate tokens from command string - oebeys only simple tokens and 
-   quoted strings */
-YAZ_EXPORT struct ccl_token *ccl_token_simple (const char *command);
+/**
+ * Splits CCL command into tokens. This function is obsolete. Use
+ * ccl_parser_tokenize instead.
+ */
+YAZ_EXPORT
+struct ccl_token *ccl_token_simple (const char *command);
 
-/* Delete token list */
-YAZ_EXPORT void ccl_token_del (struct ccl_token *list);
+/** 
+ * Deletes token list
+ */
+YAZ_EXPORT
+void ccl_token_del (struct ccl_token *list);
 
-/* Add single token after node at */
-YAZ_EXPORT struct ccl_token *ccl_token_add (struct ccl_token *at);
+/**
+ * Add single token after a given onde.
+ */
+YAZ_EXPORT
+struct ccl_token *ccl_token_add (struct ccl_token *at);
 
-/* Parse CCL Find command - NULL-terminated string */
-YAZ_EXPORT struct ccl_rpn_node *ccl_find_str (CCL_bibset bibset,
-                                   const char *str, int *error, int *pos);
+/**
+ * Parses a CCL Find command in a simple C string. Returns CCL parse
+ * tree node describing RPN if parsing is successful. If parsing is
+ * unsuccesful, NULL is returned and error and pos is set accordingly.
+ */
+YAZ_EXPORT
+struct ccl_rpn_node *ccl_find_str (CCL_bibset bibset,
+				   const char *str, int *error, int *pos);
 
-/* Parse CCL Find command - Tokens read by ccl_tokenize */
-YAZ_EXPORT struct ccl_rpn_node *ccl_find (CCL_bibset abibset, struct ccl_token *list,
+/**
+ * Parses CCL Find command from a list of CCL tokens. Otherwise similar to
+ * ccl_find_str.
+ */
+YAZ_EXPORT
+struct ccl_rpn_node *ccl_find (CCL_bibset abibset, struct ccl_token *list,
                                int *error, const char **pos);
 
-/* Parse CCL Find command */
-YAZ_EXPORT struct ccl_rpn_node *ccl_parser_find (CCL_parser cclp, struct ccl_token *list);
+/**
+ * Parses a CCL Find command from a list of CCL tokens and given a CCL
+ * parser. Otherwise similar to ccl_find_str.
+ */
+YAZ_EXPORT
+struct ccl_rpn_node *ccl_parser_find (CCL_parser cclp, struct ccl_token *list);
+
+/** Set names for AND operator in parser */
+YAZ_EXPORT
+void ccl_parser_set_op_and (CCL_parser p, const char *op);
 
-/* Set various OPs */
-YAZ_EXPORT void ccl_parser_set_op_and (CCL_parser p, const char *op);
-YAZ_EXPORT void ccl_parser_set_op_or (CCL_parser p, const char *op);
-YAZ_EXPORT void ccl_parser_set_op_not (CCL_parser p, const char *op);
-YAZ_EXPORT void ccl_parser_set_op_set (CCL_parser p, const char *op);
+/** Set names for OR operator in parser */
+YAZ_EXPORT
+void ccl_parser_set_op_or (CCL_parser p, const char *op);
 
-YAZ_EXPORT void ccl_parser_set_case (CCL_parser p, int case_sensitivity_flag);
+/** Set names for ANDNOT operator in parser */
+YAZ_EXPORT
+void ccl_parser_set_op_not (CCL_parser p, const char *op);
 
-/* Return english-readable error message */
-YAZ_EXPORT const char *ccl_err_msg (int ccl_errno);
+/** Set names for ResultSet in parser */
+YAZ_EXPORT
+void ccl_parser_set_op_set (CCL_parser p, const char *op);
 
-/* Delete RPN tree returned by ccl_find */
-YAZ_EXPORT void ccl_rpn_delete (struct ccl_rpn_node *rpn);
+/** Set case sensitivity for parser */
+YAZ_EXPORT
+void ccl_parser_set_case (CCL_parser p, int case_sensitivity_flag);
 
-/* Dump RPN tree in readable format to fd_out */
-YAZ_EXPORT void ccl_pr_tree (struct ccl_rpn_node *rpn, FILE *fd_out);
+/** Return english-readable error message for CCL parser error number */
+YAZ_EXPORT
+const char *ccl_err_msg (int ccl_errno);
 
-/* Add CCL qualifier */
-YAZ_EXPORT void ccl_qual_add (CCL_bibset b, const char *name, int no,
-			      int *attr);
+/** Delete RPN tree returned by ccl_find */
+YAZ_EXPORT
+void ccl_rpn_delete (struct ccl_rpn_node *rpn);
 
-YAZ_EXPORT void ccl_qual_add_set (CCL_bibset b, const char *name, int no,
-				  int *type, int *value, char **svalue,
-				  char **attsets);
+/** Dump RPN tree in readable format to fd_out */
+YAZ_EXPORT
+void ccl_pr_tree (struct ccl_rpn_node *rpn, FILE *fd_out);
 
-YAZ_EXPORT void ccl_qual_add_special (CCL_bibset bibset,
-                                      const char *n, const char *v);
+/** Add qualifier and supply attribute pairs for it */
+YAZ_EXPORT
+void ccl_qual_add (CCL_bibset b, const char *name, int no, int *attr);
 
-YAZ_EXPORT void ccl_qual_add_combi (CCL_bibset b, const char *n,
-                                    const char *names);
+/** Add qualifier and supply attributes pairs+attribute set for it */
+YAZ_EXPORT
+void ccl_qual_add_set (CCL_bibset b, const char *name, int no,
+		       int *type, int *value, char **svalue, char **attsets);
 
-/* Read CCL qualifier list spec from file inf */
-YAZ_EXPORT void ccl_qual_file (CCL_bibset bibset, FILE *inf);
+/** Add special qualifier */
+YAZ_EXPORT
+void ccl_qual_add_special (CCL_bibset bibset, const char *n, const char *v);
 
-/* Read CCL qualifier list spec from file inf */
-YAZ_EXPORT int ccl_qual_fname (CCL_bibset bibset, const char *fname);
+/** Add combo qualifier */
+YAZ_EXPORT
+void ccl_qual_add_combi (CCL_bibset b, const char *n, const char *names);
 
-/* Add CCL qualifier as buf spec (multiple lines). */
-YAZ_EXPORT void ccl_qual_buf(CCL_bibset bibset, const char *buf);
+/** Read CCL qualifier list spec from file inf */
+YAZ_EXPORT
+void ccl_qual_file (CCL_bibset bibset, FILE *inf);
 
-/* Add CCL qualifier as line spec. Note: line is _modified_ */
-YAZ_EXPORT void ccl_qual_line(CCL_bibset bibset, char *line);
+/** Read CCL qualifier list spec from file inf */
+YAZ_EXPORT
+int ccl_qual_fname (CCL_bibset bibset, const char *fname);
+
+/** Add CCL qualifier as buf spec (multiple lines). */
+YAZ_EXPORT
+void ccl_qual_buf(CCL_bibset bibset, const char *buf);
+
+/** Add CCL qualifier as line spec. Note: line is _modified_ */
+YAZ_EXPORT
+void ccl_qual_line(CCL_bibset bibset, char *line);
 
 /* Add CCL qualifier by using qual_name + value pair */
-YAZ_EXPORT void ccl_qual_fitem (CCL_bibset bibset, const char *value,
-                                const char *qual_name);
+YAZ_EXPORT
+void ccl_qual_fitem (CCL_bibset bibset, const char *value,
+		     const char *qual_name);
 
-/* Make CCL qualifier set */
-YAZ_EXPORT CCL_bibset ccl_qual_mk (void);
+/** Make CCL qualifier set */
+YAZ_EXPORT
+CCL_bibset ccl_qual_mk (void);
 
-/* Delete CCL qualifier set */
-YAZ_EXPORT void ccl_qual_rm (CCL_bibset *b);
+/** Delete CCL qualifier set */
+YAZ_EXPORT
+void ccl_qual_rm (CCL_bibset *b);
 
-/* Char-to-upper function */
+/** Char-to-upper function */
 extern int (*ccl_toupper)(int c);
 
-/* String utilities */
-YAZ_EXPORT int ccl_stricmp (const char *s1, const char *s2);
-YAZ_EXPORT int ccl_memicmp (const char *s1, const char *s2, size_t n);
+/** CCL version of ccl_stricmp */
+YAZ_EXPORT
+int ccl_stricmp (const char *s1, const char *s2);
 
-/* Search for qualifier 'name' in set 'b'. */
-YAZ_EXPORT struct ccl_rpn_attr *ccl_qual_search (CCL_parser cclp,
-                                                 const char *name,
-                                                 size_t len,
-                                                 int seq);
+/** CCL version of ccl_memicmp */
+YAZ_EXPORT
+int ccl_memicmp (const char *s1, const char *s2, size_t n);
 
-/* Create CCL parser */
-YAZ_EXPORT CCL_parser ccl_parser_create (void);
+/** Search for qualifier 'name' in set 'b'. */
+YAZ_EXPORT
+struct ccl_rpn_attr *ccl_qual_search (CCL_parser cclp, const char *name,
+				      size_t len, int seq);
 
-/* Destroy CCL parser */
-YAZ_EXPORT void ccl_parser_destroy (CCL_parser p);
+/** Create CCL parser */
+YAZ_EXPORT
+CCL_parser ccl_parser_create (void);
 
-YAZ_EXPORT char *ccl_strdup (const char *str);
+/** Destroy CCL parser */
+YAZ_EXPORT
+void ccl_parser_destroy (CCL_parser p);
 
-YAZ_EXPORT const char *ccl_qual_search_special (CCL_bibset b,
-						const char *name);
+/** String dup utility (ala strdup) */
+YAZ_EXPORT
+char *ccl_strdup (const char *str);
 
-YAZ_EXPORT void ccl_pquery (WRBUF w, struct ccl_rpn_node *p);
+/** Search for special qualifier */
+YAZ_EXPORT
+const char *ccl_qual_search_special (CCL_bibset b,
+						const char *name);
+/** Pretty-print CCL RPN node tree to WRBUF */
+YAZ_EXPORT
+void ccl_pquery (WRBUF w, struct ccl_rpn_node *p);
 
 #ifndef ccl_assert
 #define ccl_assert(x) ;
diff --git a/include/yaz/cql.h b/include/yaz/cql.h
index 85b3735..73c242e 100644
--- a/include/yaz/cql.h
+++ b/include/yaz/cql.h
@@ -1,4 +1,4 @@
-/* $Id: cql.h,v 1.8 2004-10-02 13:41:14 adam Exp $
+/* $Id: cql.h,v 1.9 2004-10-03 22:34:07 adam Exp $
    Copyright (C) 2002-2004
    Index Data Aps
 
@@ -7,6 +7,10 @@ This file is part of the YAZ toolkit.
 See the file LICENSE.
 */
 
+/** \file cql.h
+    \brief Header with public definitions about CQL.
+*/
+
 #ifndef CQL_H_INCLUDED
 #define CQL_H_INCLUDED
 #include <stdio.h>
@@ -14,52 +18,42 @@ See the file LICENSE.
 
 YAZ_BEGIN_CDECL
 
+/** CQL parser handle */
 typedef struct cql_parser *CQL_parser;
 
 /**
- * cql_parser_create:
- *
- * creates a CQL parser.
- *
- * Returns CQL parser or NULL if parser could not be created.
+ * Creates a CQL parser.
+ * Returns CQL parser handle or NULL if parser could not be created.
  */
 YAZ_EXPORT 
 CQL_parser cql_parser_create(void);
 
 /**
- * cql_parser_destroy:
- * @cp:  A CQL parser
+ * Destroys a CQL parser.
  *
- * Destroy CQL parser. This function does nothing if
- * NULL pointer is received.
+ * This function does nothing if NULL if received.
  */
 YAZ_EXPORT 
 void cql_parser_destroy(CQL_parser cp);
 
 /**
- * cql_parser_string:
- * @cp:  A CQL parser.
- * @str:  A query string to be parsed.
- *
- * Parses a CQL query string.
+ * Parses a CQL string query.
  *
- * Returns 0 if parsing was succesful; non-zero (error code) if
- * unsuccesful.
+ * Returns 0 if on success; non-zero (error code) on failure.
  */
 YAZ_EXPORT 
 int cql_parser_string(CQL_parser cp, const char *str);
 
 /**
- * cql_parser_stream:
- * @cp:  A CQL parser.
- * @getbyte:  Handler to read one character (for parsing).
- * @ungetbyte: Handler to unread one byte (for parsing).
- * @client_data:  User data associated with getbyte/ungetbyte handlers.
+ * Parses a CQL query - streamed query.
  *
- * Parses a CQL query from a user defined stream.
+ * This function is similar to cql_parser_string but takes a
+ * functions to read each query character from a stream.
  *
- * Returns 0 if parsing was succesful; non-zero (error code) if
- * unsuccesful.
+ * The functions pointers getbytes, ungetbyte are similar to
+ * that known from stdios getc, ungetc.
+ *
+ * Returns 0 if on success; non-zero (error code) on failure.
  */
 YAZ_EXPORT 
 int cql_parser_stream(CQL_parser cp,
@@ -68,119 +62,225 @@ int cql_parser_stream(CQL_parser cp,
                       void *client_data);
 
 /**
- * cql_parser_stdio:
- * @cp:  A CQL parser.
- * @f: FILE handler in read mode.
+ * Parses a CQL query from a FILE handle.
  *
- * Parses a CQL query from a file.
+ * This function is similar to cql_parser_string but reads from 
+ * stdio FILE handle instead.
  *
- * Returns 0 if parsing was succesful; non-zero (error code) if
- * unsuccesful.
+ * Returns 0 if on success; non-zero (error code) on failure.
  */
 YAZ_EXPORT
 int cql_parser_stdio(CQL_parser cp, FILE *f);
 
+/**
+ * The node in a CQL parse tree. 
+ */
 #define CQL_NODE_ST 1
 #define CQL_NODE_BOOL 2
 struct cql_node {
+    /** node type */
     int which;
     union {
+	/** which == CQL_NODE_ST */
         struct {
+	    /** CQL index */
             char *index;
+	    /** CQL index URI or NULL if no URI */
 	    char *index_uri;
+	    /** Search term */
             char *term;
+	    /** relation */
             char *relation;
+	    /** relation URL or NULL if no relation URI) */
 	    char *relation_uri;
+	    /** relation modifiers */
             struct cql_node *modifiers;
         } st;
+	/** which == CQL_NODE_BOOL */
         struct {
+            /** operator name "and", "or", ... */
             char *value;
+	    /** left operand */
             struct cql_node *left;
+	    /** right operand */ 
             struct cql_node *right;
+	    /** modifiers (NULL for no list) */
             struct cql_node *modifiers;
         } boolean;
     } u;
 };
 
+/**
+ * Private structure that describes the CQL properties (profile)
+ */
 struct cql_properties;
 
+/**
+ * Structure used by cql_buf_write_handlre
+ */
 struct cql_buf_write_info {
     int max;
     int off;
     char *buf;
 };
 
+/**
+ * Handler for cql_buf_write_info *
+ */
 YAZ_EXPORT
 void cql_buf_write_handler (const char *b, void *client_data);
 
+/**
+ * Prints a CQL node and all sub nodes. Hence this function
+ * prints the parse tree which is as returned by cql_parser_result.
+ */
 YAZ_EXPORT
 void cql_node_print(struct cql_node *cn);
+
+/**
+ * This function creates a search clause node (st).
+ */
 YAZ_EXPORT
 struct cql_node *cql_node_mk_sc(const char *index,
                                 const char *relation,
                                 const char *term);
 
 
+/**
+ * This function applies a prefix+uri to "unresolved" index and relation
+ * URIs.
+ *
+ * "unresolved" URIs are those nodes where member index_uri / relation_uri
+ * is NULL.
+ */
 YAZ_EXPORT
 struct cql_node *cql_apply_prefix(struct cql_node *cn,
-				  const char *relation,
-				  const char *term);
+				  const char *prefix,
+				  const char *uri);
+
+/**
+ * This function creates a boolean node.
+ */
 YAZ_EXPORT
 struct cql_node *cql_node_mk_boolean(const char *op);
+
+/**
+ * Destroys a node and its children.
+ */
 YAZ_EXPORT
 void cql_node_destroy(struct cql_node *cn);
+
+/**
+ * Duplicate a node (returns a copy of supplied node) .
+ */
 YAZ_EXPORT
 struct cql_node *cql_node_dup (struct cql_node *cp);
+
+/**
+ * This function returns the parse tree of the most recently parsed
+ * CQL query.
+ *
+ * The function returns NULL if most recently parse failed.
+ */
 YAZ_EXPORT
 struct cql_node *cql_parser_result(CQL_parser cp);
 
+/**
+ * This function converts a CQL node tree to XCQL and writes the
+ * resulting XCQL to a user-defined output stream.
+ */
 YAZ_EXPORT
 void cql_to_xml(struct cql_node *cn, 
                 void (*pr)(const char *buf, void *client_data),
                 void *client_data);
+/**
+ * This function converts a CQL node tree to XCQL and writes the
+ * resulting XCQL to a FILE handle (stdio) 
+ */
 YAZ_EXPORT
 void cql_to_xml_stdio(struct cql_node *cn, FILE *f);
-YAZ_EXPORT
-int cql_to_xml_buf(struct cql_node *cn, char *out, int max);
 
+/**
+ * This function converts a CQL node tree to XCQL and writes
+ * the resulting XCQL to a buffer 
+ */
 YAZ_EXPORT
-struct cql_node *cql_node_mk_proxargs(const char *relation,
-                                      const char *distance,
-                                      const char *unit,
-                                      const char *ordering);
-
+int cql_to_xml_buf(struct cql_node *cn, char *out, int max);
 
+/**
+ * Utility function that prints to a FILE.
+ */
 YAZ_EXPORT
 void cql_fputs(const char *buf, void *client_data);
 
+/**
+ * The CQL transform handle. The transform describes how to
+ * convert from CQL to PQF (Type-1 AKA RPN).
+ */
 typedef struct cql_transform_t_ *cql_transform_t;
 
+/**
+ * Creates a CQL transform handle. The transformation spec is read from
+ * a FILE handle (which is assumed opened in read mode).
+ */
 YAZ_EXPORT
 cql_transform_t cql_transform_open_FILE (FILE *f);
+
+/**
+ * Creates a CQL transform handle. The transformation spec is read from
+ * a file with the filename given.
+ */
 YAZ_EXPORT
 cql_transform_t cql_transform_open_fname(const char *fname);
+
+/**
+ * Destroys a CQL transform handle.
+ */
 YAZ_EXPORT
 void cql_transform_close(cql_transform_t ct);
 
+/**
+ * Performs a CQL transform to PQF given a CQL node tree and a CQL
+ * transformation handle. The result is written to a user-defined stream.
+ */
 YAZ_EXPORT
 void cql_transform_pr(cql_transform_t ct,
                       struct cql_node *cn,
                       void (*pr)(const char *buf, void *client_data),
                       void *client_data);
 
+/**
+ * Performs a CQL transform to PQF given a CQL node tree and a CQL
+ * transformation handle. The result is written to a file specified by
+ * FILE handle (which must be opened for writing).
+ */
 YAZ_EXPORT
 int cql_transform_FILE(cql_transform_t ct,
                        struct cql_node *cn, FILE *f);
 
+/**
+ * Performs a CQL transform to PQF given a CQL node tree and a CQL
+ * transformation handle. The result is written to a buffer. 
+ */
 YAZ_EXPORT
 int cql_transform_buf(cql_transform_t ct,
                       struct cql_node *cn, char *out, int max);
+/**
+ * Returns error code and additional information from last transformation.
+ * Performs a CQL transform given a CQL node tree and a CQL transformation.
+ */
 YAZ_EXPORT
 int cql_transform_error(cql_transform_t ct, const char **addinfo);
 
+/**
+ * Returns the CQL message corresponding to a given error code.
+ */
 YAZ_EXPORT
 const char *cql_strerror(int code);
 
+/**
+ * Returns the standard CQL context set URI.
+ */
 YAZ_EXPORT
 const char *cql_uri();
 
diff --git a/include/yaz/yaz-version.h b/include/yaz/yaz-version.h
index 5320fe0..602e156 100644
--- a/include/yaz/yaz-version.h
+++ b/include/yaz/yaz-version.h
@@ -2,11 +2,12 @@
  * Copyright (c) 1995-2004, Index Data.
  * See the file LICENSE for details.
  *
- * $Id: yaz-version.h,v 1.51 2004-10-01 13:05:09 adam Exp $
+ * $Id: yaz-version.h,v 1.52 2004-10-03 22:34:07 adam Exp $
  */
 
-/*
- * Current software version.
+/**
+ * \file yaz-version.h
+ * \brief Defines YAZ version.
  */
 #ifndef YAZ_VERSION
 
diff --git a/src/cql.y b/src/cql.y
index 91dbf7c..d2cc5c5 100644
--- a/src/cql.y
+++ b/src/cql.y
@@ -1,4 +1,4 @@
-/* $Id: cql.y,v 1.5 2004-10-02 13:28:26 adam Exp $
+/* $Id: cql.y,v 1.6 2004-10-03 22:34:07 adam Exp $
    Copyright (C) 2002-2004
    Index Data Aps
 
@@ -9,6 +9,12 @@ See the file LICENSE.
  bison parser for CQL grammar.
 */
 %{
+/** 
+ * \file cql.c
+ * \brief Implements CQL parser.
+ *
+ * This is a YACC parser, but since it must be reentrant, Bison is required.
+ */
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
diff --git a/src/cqlstdio.c b/src/cqlstdio.c
index c9d50ff..d6ea47d 100644
--- a/src/cqlstdio.c
+++ b/src/cqlstdio.c
@@ -1,12 +1,17 @@
-/* $Id: cqlstdio.c,v 1.1 2003-10-27 12:21:30 adam Exp $
-   Copyright (C) 2002-2003
+/* $Id: cqlstdio.c,v 1.2 2004-10-03 22:34:07 adam Exp $
+   Copyright (C) 2002-2004
    Index Data Aps
 
 This file is part of the YAZ toolkit.
 
-See the file LICENSE.
+See the file LICENSE for details.
 */
 
+/**
+ * \file cqlstdio.c
+ * \brief Implements query stream reading using FILE handle.
+ */
+
 #include <yaz/cql.h>
 
 int getbyte_stream(void *client_data)
diff --git a/src/cqlstrer.c b/src/cqlstrer.c
index 46b8a4e..4a05a08 100644
--- a/src/cqlstrer.c
+++ b/src/cqlstrer.c
@@ -1,12 +1,17 @@
-/* $Id: cqlstrer.c,v 1.2 2003-12-18 17:05:01 mike Exp $
-   Copyright (C) 2002-2003
+/* $Id: cqlstrer.c,v 1.3 2004-10-03 22:34:07 adam Exp $
+   Copyright (C) 2002-2004
    Index Data Aps
 
 This file is part of the YAZ toolkit.
 
-See the file LICENSE.
+See the file LICENSE details.
 */
 
+/**
+ * \file cqlstrer.c
+ * \brief Implements CQL error code map to description string.
+ */
+
 #include <yaz/cql.h>
 
 /*
diff --git a/src/cqlstring.c b/src/cqlstring.c
index bf18b07..94ea25e 100644
--- a/src/cqlstring.c
+++ b/src/cqlstring.c
@@ -1,11 +1,18 @@
-/* $Id: cqlstring.c,v 1.1 2003-10-27 12:21:30 adam Exp $
-   Copyright (C) 2002-2003
+/* $Id: cqlstring.c,v 1.2 2004-10-03 22:34:07 adam Exp $
+   Copyright (C) 2002-2004
    Index Data Aps
 
 This file is part of the YAZ toolkit.
 
 See the file LICENSE for details.
 */
+
+/**
+ * \file cqlstring.c
+ * \brief Implements query stream reader that reads from a C string.
+ */
+
+
 #include <yaz/cql.h>
 
 struct cql_buf_info {
diff --git a/src/cqltransform.c b/src/cqltransform.c
index 6ceeb63..5cca9a6 100644
--- a/src/cqltransform.c
+++ b/src/cqltransform.c
@@ -1,4 +1,4 @@
-/* $Id: cqltransform.c,v 1.10 2004-10-02 13:28:26 adam Exp $
+/* $Id: cqltransform.c,v 1.11 2004-10-03 22:34:07 adam Exp $
    Copyright (C) 2002-2004
    Index Data Aps
 
@@ -7,6 +7,11 @@ This file is part of the YAZ toolkit.
 See the file LICENSE.
 */
 
+/**
+ * \file cqltransform.c
+ * \brief Implements CQL transform (CQL to RPN conversion).
+ */
+
 #include <stdlib.h>
 #include <string.h>
 #include <yaz/cql.h>
diff --git a/src/cqlutil.c b/src/cqlutil.c
index 5a28cb4..2061325 100644
--- a/src/cqlutil.c
+++ b/src/cqlutil.c
@@ -1,12 +1,17 @@
-/* $Id: cqlutil.c,v 1.4 2004-03-16 13:22:16 adam Exp $
+/* $Id: cqlutil.c,v 1.5 2004-10-03 22:34:07 adam Exp $
    Copyright (C) 2002-2004
    Index Data Aps
 
 This file is part of the YAZ toolkit.
 
-See the file LICENSE.
+See the file LICENSE for details.
 */
 
+/**
+ * \file cqlutil.c
+ * \brief Implements CQL tree node utilities.
+ */
+
 #include <stdlib.h>
 #include <string.h>
 
diff --git a/src/version.c b/src/version.c
index a819d2c..b073657 100644
--- a/src/version.c
+++ b/src/version.c
@@ -1,10 +1,19 @@
 /*
- * Copyright (c) 1995-2003, Index Data.
+ * Copyright (c) 1995-2004, Index Data.
  * See the file LICENSE for details.
- * Sebastian Hammer, Adam Dickmeiss
  *
- * $Id: version.c,v 1.1 2003-10-27 12:21:36 adam Exp $
+ * $Id: version.c,v 1.2 2004-10-03 22:34:07 adam Exp $
  */
+
+/**
+ * \file version.c
+ * \brief Implements YAZ version utilities.
+ */
+
+/**
+ * \mainpage The YAZ Toolkit.
+ */
+ 
 #if HAVE_CONFIG_H
 #include <config.h>
 #endif
diff --git a/src/xcqlutil.c b/src/xcqlutil.c
index 45815b0..d73d517 100644
--- a/src/xcqlutil.c
+++ b/src/xcqlutil.c
@@ -1,4 +1,4 @@
-/* $Id: xcqlutil.c,v 1.3 2004-03-15 21:39:06 adam Exp $
+/* $Id: xcqlutil.c,v 1.4 2004-10-03 22:34:07 adam Exp $
    Copyright (C) 2002-2004
    Index Data Aps
 
@@ -6,6 +6,12 @@ This file is part of the YAZ toolkit.
 
 See the file LICENSE.
 */
+
+/**
+ * \file xcqlutil.c
+ * \brief Implements CQL to XCQL conversion.
+ */
+
 #include <stdlib.h>
 #include <string.h>
 #include <stdio.h>